22 product types
Standard Car Wash Shampoo
Safe for all paint types, waxes, sealants and ceramic coatings. The foundation of every correct wash routine.
- pH Range
- 6.5 – 7.5
- Dilution
- 1:300 to 1:500
- Foam Level
- Medium–High
- Coating-Safe
- Yes
High-Foam Pre-Wash Shampoo
High-surfactant formula for foam cannons. Thick foam dwells on the surface, softening grime before contact washing.
- pH Range
- 7.0 – 8.5
- Dilution in Cannon
- 1:5 to 1:20
- Dwell Time
- 3 – 5 min, never let it dry
- Surfactant
- Anionic blend
Waterless / Rinseless Wash Spray
Lubricant-rich polymer spray allowing dust removal without water. Only for lightly soiled surfaces.
- Water Required
- None
- Lubricity
- High (polymer-based)
- Max Contamination
- Light dust only
- pH
- Neutral
Traffic Film Remover
High-alkaline degreaser for engine bays and undercarriages. NOT for regular paint washing — strips all protection.
- pH Range
- 10 – 13
- Safe on Coatings
- No — strips protection
- Best For
- Engine bay, undercarriage
- Dilution
- 1:10 to 1:50
Waffle-Weave Drying Towel
Grid pattern creates deep pockets that trap water away from the surface, reducing scratch risk during drying.
- GSM
- 400 – 600
- Weave
- Waffle (grid)
- Size
- 60×90 cm typical
- Edge Finish
- Silk or satin edging
Dual-Pile Buffing Microfiber
Short pile for wiping, long pile for buffing. Best for wax, polish, and ceramic coating residue removal.
- GSM
- 300 – 400
- Pile Type
- Dual (short + long)
- Size
- 40×40 cm typical
- Blend
- 80/20 polyester-nylon
Lint-Free Glass Microfiber
Ultra-fine weave for glass only. Zero lint, removes smears without streaks.
- GSM
- 200 – 280
- Weave
- Ultra-fine twill
- Lint Level
- Zero lint
- Note
- Keep separate from paint cloths
Long-Pile Microfiber Wash Mitt
Deep pile holds contaminants away from the paint surface. Far safer than sponges for all painted surfaces.
- GSM
- 600 – 800
- Pile Length
- Long / deep
- vs Sponge
- Dramatically safer for paint
- Washing
- Machine washable, no softener
Automotive Clay Bar
Viscoelastic compound that mechanically lifts bonded contamination from clear coat without chemicals.
- Grades
- Fine / Medium / Heavy
- Weight
- 50 – 200g per bar
- Coverage
- ~3–5 cars per 100g
- Frequency
- 1–2 times per year
Iron / Fallout Remover Spray
Iron-reactive spray that binds embedded iron particles into a water-soluble complex so they rinse away. Many turn purple or red as they react.
- Active Chemical
- Commonly thioglycolate-based
- pH
- Varies by manufacturer — some pH-balanced near neutral, others mildly acidic
- Dwell Time
- 3 – 5 minutes
- Colour Change
- Purple/red on ferrous contamination
Tar & Bitumen Remover
Solvent-based spray that dissolves road tar, bitumen and heavy wax deposits.
- Chemistry
- Aliphatic hydrocarbon
- Strips Wax
- Yes — reapply protection after
- Dwell Time
- 1 – 3 minutes
- Safe on Paint
- Yes (rinse within 5 min)
IPA Panel Wipe
Used before ceramic coating application to remove all oils, wax residue and silicone. Essential for correct coating bonding.
- Mix
- 70% IPA diluted 1:1 with distilled water
- Use Case
- Pre-coating degreasing
- Dries In
- 30 – 60 seconds
- Residue
- Zero
Heavy Cut Polishing Compound
Aggressive abrasive for removing deep scratches, heavy swirls, and oxidation. Must be followed by finishing polish.
- Abrasive Size
- 4 – 8 microns
- Defect Removal
- Deep scratches, oxidation
- Machine Speed
- DA 4 – 6 · rotary 1,500 – 2,000 RPM
- Pad
- Heavy cut / wool
Fine Finishing Polish
Fine abrasives for removing light swirls, compound holograms, and enhancing gloss before protection application.
- Abrasive Size
- 0.5 – 2 microns
- Defect Removal
- Light swirls, haze, holograms
- Machine Speed
- DA 3 – 4 · rotary 1,000 – 1,500 RPM
- Pad
- Finishing / soft foam
Dual Action Random Orbital Polisher
The safest polishing machine for DIY correction. The random orbit motion considerably reduces the risk of overheating or cutting through clear coat compared with a rotary, but incorrect pad, pressure, speed or edge technique can still damage thin clear coat.
- Orbit Size
- 8 – 15 mm
- Backing Plate
- 75mm, 80mm or 125mm
- Speed
- Rated in OPM (orbits/min) — commonly ~2,000 – 7,500; follow the machine's own scale
- Weight
- 1.4 – 2.2 kg typical
Paint Thickness Gauge (PTG)
Measures total paint thickness in microns on steel or aluminium panels. Standard gauges cannot isolate the clear-coat layer — the reading includes primer, base coat, clear coat and any repaint or filler. Useful before correction to spot thin panels and previous respray work.
- Measurement Range
- 0 – 1,500 microns
- Accuracy
- ±1 – 2.5 microns
- What it reads
- Total coating, not clear coat alone
- Typical clear coat
- ~35 – 50 microns (varies by maker/panel)
Consumer SiO2 Spray Coating
Spray-and-wipe ceramic sealant. Easy application, low defect risk, shorter durability than liquid coatings.
- SiO2 Content
- Rarely published
- Application
- Spray-and-wipe
- Layer
- Thin and sacrificial
- Durability
- Typically 3 – 6 months in India
Professional DIY Liquid Ceramic Coating
High-concentration SiO2 that cross-links into a semi-permanent hard coating. Requires surface prep and controlled environment.
- SiO2 Content
- Rarely published
- Flash Time
- 1 – 3 min per panel
- “9H” claims
- Pencil hardness, not scratch-proofing
- Durability
- Often 1 – 2 years in Indian conditions
Graphene-Enhanced Coating
SiO2 coating with a graphene additive. Marketed for better heat resistance, less dust attraction and fewer water spots — real-world differences are modest.
- Heat Resistance
- Claimed — little independent data
- Anti-Static
- Claimed by some brands
- Water Spotting
- Claimed — results vary
- Durability
- Similar to a good SiO2 coating
SiO2 Ceramic Boost Spray
Maintenance spray to top up hydrophobic properties on an existing ceramic coating.
- SiO2 Content
- Rarely published
- Application
- Spray on wet or dry panel
- Use Frequency
- About every 3 months
- Extends Coating Life
- Yes, when used regularly
Induction Motor Pressure Washer
Lower RPM, quieter, longer-lasting than universal motors. Best choice for regular home car washing use.
- Pressure
- 100 – 130 bar
- Flow Rate
- 300 – 420 L/hr
- Motor Type
- Induction (AC)
- Noise Level
- 68 – 75 dB
Triplex Plunger Professional Washer
Industrial-grade cold water units. 100% duty cycle, triplex plunger pump runs cooler and lasts significantly longer.
- Pressure
- 150 – 200 bar
- Flow Rate
- 500 – 900 L/hr
- Pump Type
- Triplex plunger
- Duty Cycle
- 100% continuous